Full automatic scissor lift

Full automatic scissor lift
1. The anti-skid steel plate on the platform surface can be extended, and the steel pipe guardrail with strong bearing capacity can be folded without tools.
2. The use of maintenance free lifting arm sleeve, powder coating and nickel plated pin increases the wear resistance of the axle pin and extends the service life of the lifting platform.
3. Low noise enables operators to operate in a quiet working environment, and the large angle steering system provides a face lift.
4. Walking, backing, turning, lifting and lowering can be realized on the platform. It can walk by itself without outriggers. It is very convenient and flexible to use, and improves the working efficiency. Specific specifications and models can be specially designed and manufactured according to user requirements.
Now, more and more factories are using scissors type elevators, which also need to be placed correctly. Do you know what is the correct placement method? Now let's follow Xiao Bian to understand!
If the scissors lift has abnormal noise and action during use, we must immediately stop using the scissors lift and contact the designated after-sales service company for inspection. Before each use, please check the elevator in advance, for example, check whether the fixing bolts are loose. If unsafe conditions are found, do not use and repair such equipment.
If the wheel of the wheelchair is wet in the scissor lift, the braking force of the wheelchair will not be great. In this case, extra care should be taken. Be careful not to exceed its rated load.
Keep the plane of the scissor lift clean. Please do not get on or off the platform during the lifting or lowering process. When the vehicle is stopped and not in use, the released platform shall be folded as required, so that the vehicle can start.
When using the scissor lift, you should pay attention to that you must not put your arms and legs within the scope of the scissor lift, because it will cause unnecessary injuries. When the platform is raised or lowered, the front bezel is placed vertically and in the vertical slot at the bottom. It is not allowed to start the platform by raising or lowering before the front block is placed vertically. When someone is on the equipment in use, no one is allowed to press the input button of the control switch.
Although the use and maintenance cost of scissors lift is high, its comprehensive performance far exceeds that of traditional steel lifting equipment. Even so, scissors lifts that are not used for a long time are also prone to failure to lift normally, which is generally attributed to the following reasons.
1. Check whether the solenoid valve of the scissor lift of the lift is energized, and use a multimeter to check whether the solenoid valve can still be used. If you can't, change it.
2. Check whether the lifting switch of the distribution panel of the scissor lift has poor contact.
3. Check whether the power transmission chain between aluminum alloy steel plates works normally. The scissor lift is different from other equipment. The lifting of the scissor lift is mainly through the chain between the aluminum plate and the aluminum plate to transmit power. Therefore, when the chain has a problem, the equipment is easy to rise normally and cannot land.
4. Check whether the aluminum plate is deformed. Although the resistance of aluminum plate is very strong, there is a certain limit. When encountering too strong lateral sharp object impact, the aluminum plate will also slightly deform, causing the clamping phenomenon between the aluminum plate and the aluminum plate, which should be avoided in normal use.
5. Due to the poor construction environmental conditions on the site, cement, mortar and dust cannot be removed. The mutual wear of gears and racks should also be paid attention to and new parts should be replaced.
Scissor lift is currently and will become the research direction of the lifting equipment industry for a long time in the future, and it will certainly undergo major industrial changes in the future and become the priority material of the industry.