机械设备
10移动式升降机自行走移动式升降机1
10移动式升降机自行走移动式升降机6
10移动式升降机自行走移动式升降机2
10移动式升降机自行走移动式升降机4
10移动式升降机自行走移动式升降机5
10移动式升降机自行走移动式升降机3

Mobile lift Self propelled mobile lift

10移动式升降机自行走移动式升降机1
10移动式升降机自行走移动式升降机6
10移动式升降机自行走移动式升降机2
10移动式升降机自行走移动式升降机4
10移动式升降机自行走移动式升降机5
10移动式升降机自行走移动式升降机3
Product Description
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[Product parameters, parameters]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

In the past spring, summer has also come quietly. The temperature has also been rising quietly in recent days, and there are many thunderstorms. As a result, many failures of lifting platform equipment have varied. Due to the high frequency of use of mobile elevators, the drying parts of mobile elevators have become more and more worn, which has become a difficult problem in the normal operation of mobile elevators and cargo elevators, Our technicians have been studying in depth, and finally our efforts have paid off. We have developed some methods for your reference:
1. In order to prevent the mechanical mobile elevator from causing failures, the oil cylinder and cooling system are prone to leakage, poor sealing of key components and other problems in summer. In this case, daily work must be checked
2. In summer and rainy season, it is too wet. The mobile elevator should be well protected against moisture and humidity. Do not work outdoors in rainy days
3. When working indoors, the mobile elevator shall keep the room dry and keep ventilation and heat dissipation.
4. In consideration of thermal expansion and cold contraction, our main frame is steel. Mobile elevator operators must pay attention to the maintenance of key parts of the elevator in the hot environment, and must regularly check whether the lubrication is in place.
5. As for the selection of hydraulic oil for mobile elevators, we must always follow the principle of using the same type of hydraulic oil in any season and selecting No. 46 hydraulic oil in summer to better adapt to the high temperature in summer.
6. When working in the hot sun at high temperature in summer, it is necessary to cover the motor, electrical appliances, oil cylinder and other parts properly, but at the same time, the mobile elevator should be ventilated and cooled to prevent the machine from reaching the high temperature condition, so as to provide a good operating environment for the operation of the mobile elevator. The operation can be guaranteed only after a period of work and a rest.
7. In view of the problem that the oil cylinder and cooling system are prone to leakage and the sealing of key components is poor, the operator should do a good job in checking to prevent such problems from causing equipment failure and unnecessary losses.
Mobile elevator is a convenient high-altitude operation equipment, which is widely used in municipal gardens, stadiums, exhibition halls and other places. Customers often report whether the mobile elevator will shake during operation. Today, I will give you a detailed introduction to the causes and preventive measures of mobile elevator shaking.
The reason for the mobile elevator shaking: The mobile elevator is based on its scissors structure. When the equipment rises to a certain height, it will shake to a certain extent. Many customers will worry about its safety. In fact, this is normal. The State Administration of Quality Supervision has no specific data on the shaking amplitude in the elevator standards, but it is generally stipulated that the shaking shall not exceed 5%.
Therefore, users can safely use mobile elevators as long as they do the following:
(1) The shaking amplitude of the mobile elevator is proportional to its lifting height. The higher the height, the greater the shaking. When using the mobile elevator at a working height of 10 meters, please use safety protection measures if possible.
(2) The load of the mobile elevator shall not exceed its rated load when it is working. When the elevator is lifted to a fixed height, the greater the mass of the lifted object, the greater the shaking
(3) When using the mobile elevator outdoors, please stop using it when the wind force exceeds Grade 5; When the lifting height is more than 10 meters, the wind rope at the four corners of the lifting platform shall be tightened and fixed, and the outriggers shall be strengthened for protection and stability to avoid the safety accident of the lift caused by excessive swing.
1. The anti-skid steel plate on the platform surface can be extended, and the steel pipe guardrail with strong bearing capacity can be folded without tools.
2. The use of maintenance free lifting arm sleeve, powder coating and nickel plated pin increases the wear resistance of the axle pin and extends the service life of the lifting platform.
3. Low noise enables operators to operate in a quiet working environment, and the large angle steering system provides a face lift.
4. Walking, backing, turning, lifting and lowering can be realized in class on the table, without the outrigger class walking at a safe height. It is very convenient and flexible to use, and improves the work efficiency. Specific specifications and models can be specially designed and manufactured according to user requirements.

 

扫二维码用手机看
未找到相应参数组,请于后台属性模板中添加